Systems can be configured for practically any vehicle.
There must be room for the sensors to be screwed on to the tyre valves. Sensors are 20mm diameter and 20mm long and should not protrude beyond the tyre profile when fitted. In some cases, it may be necessary to fit shorter valve stems.
Please also check the maximum tyre pressure. Most cars use the standard version, TD1000, which is for pressures up to 60psi.
For higher pressures, typically on vans, motor homes and heavier vehicles use TD1200 which has different sensors with a range up to 180psi
will this system work with my bmw x5 run flat tyres thanks
Yes, we would recommend TD1000 for this application ( four tyres)
Hi, I run my motorhome tyres at 65psi. Is the TD1000 able to work with this pressure and only alert if the pressure drops below an acceptable level, ie 58psi?
It would be better to choose TD1200, as you are running the tyres above the 60psi inflation pressure which is the maximum recommended for TD1000.